ICP Hot Surface Igniter Kit for RGS150LECB0AAAA — OEM 1171306 with Wiring | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This genuine OEM hot surface igniter (part number 1171306), paired with the matching igniter wiring kit (part number 1188370), is the ignition source for the ICP RGS150LECB0AAAA gas furnace. On each call for heat, the control board energizes the igniter, which glows red-hot to ignite the gas at the burners. Hot surface igniters are brittle and degrade with every heating cycle, so they are the single most common furnace no-heat failure. The included wiring kit ensures a clean, correct connection — eliminating the cracked or corroded harness that often accompanies an aged igniter. If your furnace blower runs but never produces heat, a failed igniter is the first suspect.
Specifications
| Spec | Value |
|---|---|
| Part Numbers | 1171306 (Igniter), 1188370 (Wiring Kit) |
| Type | Hot Surface Igniter |
| Includes | Igniter element and igniter wiring kit |
| Brand | ICP / Tempstar / Heil / Comfortmaker |
| Fits Model | RGS150LECB0AAAA |
| Application | Gas Furnace Ignition |
| Fit | OEM Genuine Replacement |
Compatibility
Designed for the ICP RGS150LECB0AAAA and shared across many Tempstar, Heil, and Comfortmaker gas furnaces using this igniter and harness. Confirm your model and serial number on the furnace rating plate before ordering, and match the igniter mounting style to your existing part.
Installation Guide
- Safety First — Shut off gas and disconnect power, then verify zero voltage with a multimeter. Igniters are fragile — never touch the element with bare fingers.
- Access — Remove the furnace burner / control compartment panel.
- Document — Photograph the igniter position and wiring routing before disconnecting.
- Remove — Disconnect the old igniter harness and remove the mounting screw(s); discard the cracked element.
- Install — Mount the new igniter without touching the silicon nitride/carbide element, then connect the new wiring kit per your photos.
- Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light reliably.
Signs You Need a Replacement
- Furnace blower runs but no heat is produced
- Igniter does not glow on a call for heat
- Visible cracks, chips, or white spots on the igniter element
- Furnace ignites intermittently or locks out after several tries
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days