ICP Hot Surface Igniter Kit for RGS150HSCA0AAAA — OEM 1171306 with Wiring | Ships Today

Overview

This OEM hot surface igniter kit for the ICP / Heil / Tempstar RGS150HSCA0AAAA gas furnace includes the igniter (part 1171306) and the matching igniter wiring kit (part 1188370). The hot surface igniter is energized by the control board at the start of each heat cycle; it glows red-hot to ignite gas at the burners. Because it operates at extreme temperature and is brittle, the igniter is one of the most common furnace failure points — it cracks, develops hairline fractures, or simply burns out, leaving you with no heat. The included wiring kit ensures a clean, corrosion-free connection so the new igniter draws proper current and lights reliably.

Specifications

Compatibility

Designed for the ICP RGS150HSCA0AAAA and related Heil, Tempstar, and Comfortmaker furnaces using the 1171306 igniter and 1188370 wiring kit. Confirm your existing igniter style before ordering.

Installation Guide

1. Safety First — Shut off gas and power, and verify zero voltage with a multimeter.
2. Access — Remove the burner compartment door.
3. Document — Photograph the igniter position and wiring routing. Handle the new igniter only by its ceramic base — never touch the element.
4. Remove — Unplug the igniter harness and unscrew the old igniter from the burner bracket.
5. Install — Mount the new igniter at the correct position over the burner, then connect the new wiring kit.
6. Test — Restore gas and power, start a heat call, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

• No heat — furnace cycles but burners never light
• Igniter does not glow or glows weakly during the ignition sequence
• Visible cracks, blistering, or breaks in the ceramic element
• Furnace locks out after repeated failed ignition attempts

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.