ICP Hot Surface Igniter Kit for RGS150HECB0AAAA Gas Furnace — Includes Wiring Harness | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter assembly is the ignition source for the ICP Tempstar Heil RGS150HECB0AAAA 150,000 BTU gas furnace. When the thermostat calls for heat, the control board energizes this igniter; its silicon-carbide element glows red-hot and lights the burners. Over time the brittle element develops hairline cracks or carbon buildup that prevent it from reaching ignition temperature, producing no-heat calls, repeated lockouts, or a furnace that clicks but never lights. This listing covers OEM igniter part 1171306 together with igniter wiring kit 1188370, so you replace the element and its harness in one job.
Specifications
| Spec | Value |
|---|---|
| Igniter Part Number | 1171306 |
| Wiring Kit Part Number | 1188370 |
| Type | Hot Surface Igniter |
| Brand | ICP (Tempstar / Heil) |
| Application | Gas Furnace Burner Ignition |
| Fit | OEM Replacement |
Compatibility
Engineered for the ICP / Tempstar / Heil RGS150HECB0AAAA furnace and shared-platform RGS-series models that call out igniter 1171306. Because ICP, Tempstar, Heil, and Comfortmaker furnaces are built on common chassis, this igniter fits many sister units — always confirm against your unit's parts list before installing.
Installation Guide
- Safety First — Shut off the gas at the valve and disconnect electrical power. Verify zero voltage at the control board with a multimeter.
- Access — Remove the furnace burner-compartment door.
- Document — Photograph the igniter bracket position and the harness routing before disconnecting anything.
- Remove — Unplug the igniter connector, back out the mounting screw, and withdraw the old igniter carefully. Never touch the new element with bare fingers — skin oils cause hot spots and early failure.
- Install — Mount the new 1171306 igniter in the same orientation, route and plug in the 1188370 wiring kit per your photo.
- Test — Restore gas and power, run a heat cycle, and confirm the igniter glows, burners light cleanly, and there are no lockouts.
Signs You Need a Replacement
- Furnace clicks and tries to start but the burners never light.
- Visible cracks, white discoloration, or carbon on the igniter element.
- Repeated ignition lockouts requiring a power-cycle to reset.
- No glow visible through the sight port during a heat call.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days