ICP Hot Surface Igniter Kit for RGS120STBA0AAA — OEM 1171306 with Wiring Harness | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter kit (part 1171306) is the factory ignition source for the ICP / Heil / Tempstar RGS120STBA0AAA gas furnace. The igniter element heats to roughly 2,000°F to ignite the gas at the burners on each call for heat. This kit also includes the matching igniter wiring kit (1188370) so the connector and pigtail are replaced together for a clean, reliable install. A failed hot surface igniter is one of the most common causes of no-heat calls: the silicon-carbide or silicon-nitride element becomes brittle with thermal cycling and eventually cracks or fails to glow. Symptoms include the furnace cycling on the inducer and gas valve but never lighting, a visible crack in the igniter, or no orange glow during the ignition sequence.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (igniter), 1188370 (wiring kit) |
| Type | Hot Surface Igniter |
| Brand | ICP / Heil / Tempstar |
| Fits Model | RGS120STBA0AAA |
| Voltage | 120V |
| Application | Gas Furnace Ignition |
Compatibility
Engineered for the ICP/Tempstar/Heil RGS120STBA0AAA furnace and shared chassis variants. Always confirm the OEM number stamped on your existing igniter and the connector style before installing.
Installation Guide
- Safety First — Disconnect power at the furnace switch and shut off the gas. Verify zero voltage with a multimeter.
- Access — Remove the burner/blower service panel.
- Document — Photograph the igniter bracket and wiring connector before disconnecting.
- Remove — Unplug the igniter harness, remove the mounting screw, and lift the old igniter out without touching the element.
- Install — Mount the new igniter (handle by the ceramic base only), install the new wiring kit, and reconnect.
- Test — Restore gas and power, then watch for a glow and clean burner light-off on the next heat call.
Signs You Need a Replacement
- Furnace runs the inducer but never ignites (no-heat lockout).
- No orange glow visible during the ignition sequence.
- Visible cracks, white spots, or breaks in the igniter element.
- Control board flashing an ignition-failure fault code.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days