ICP Hot Surface Igniter Kit for RGS120SEBB0AAA — OEM 1171306 with Wiring | Ships Today

Overview

This OEM hot surface igniter (part number 1171306) bundled with the matching igniter wiring kit (1188370) is the ignition source for the ICP/Tempstar/Heil RGS120SEBB0AAA gas furnace. On each heat call the control board sends voltage to the igniter, which glows red-hot to light the burners. Hot surface igniters are brittle and degrade over time — they crack, develop hairline fractures, or simply burn out — producing the classic symptom of a furnace that clicks and tries to fire but never lights. The included wiring kit ensures a clean, corrosion-free connection so the new igniter receives full voltage.

Specifications

Compatibility

Designed for the ICP-family RGS120SEBB0AAA furnace and equivalent Tempstar, Heil, and Comfortmaker models using this igniter. Handle the silicon nitride/carbide element only by its base — skin oils shorten its life. Confirm the part number before ordering.

Installation Guide

1. Safety First — Disconnect power and verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the igniter mounting position and wiring routing.
4. Remove — Unplug the igniter connector, remove the mounting screw, and lift out the old igniter without touching the element.
5. Install — Mount the new igniter, install the supplied wiring kit, and seat the connector fully.
6. Test — Restore power and watch a full ignition cycle to confirm the igniter glows and the burners light.

Signs You Need a Replacement

• Furnace clicks and attempts ignition but never lights
• Visible cracks or breaks in the igniter element
• No glow during the heat call
• Repeated lockouts after several failed ignition attempts

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.