What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120LRAB0AAA — OEM 1171306 + Wiring | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120LRAB0AAA — OEM 1171306 + Wiring | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS120LRAB0AAA — OEM 1171306 + Wiring | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS120LRAB0AAA — OEM 1171306 + Wiring | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (part #1171306), supplied with the matching igniter wiring kit (part #1188370), is the ignition source for the ICP / Tempstar / Heil RGS120LRAB0AAA gas furnace. On a call for heat the control board sends voltage to the igniter, which glows orange-hot and lights the burner gas. Igniters are brittle and consumable — repeated thermal cycling causes hairline cracks and erosion until the element no longer reaches ignition temperature. The included wiring kit ensures a clean, factory-spec connection and is the #1 cause of intermittent no-heat calls.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil / Comfortmaker)
Application	Gas furnace burner ignition

Compatibility

Designed for the ICP/Tempstar/Heil RGS120LRAB0AAA 120,000 BTU furnace and shared-platform models. Confirm the igniter part number and connector style against your existing unit.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the burner/service panel.
Document — Photograph the igniter position and wiring routing before disconnecting.
Remove — Unplug the igniter harness and unscrew the old igniter; handle only by the ceramic base, never the fragile element.
Install — Mount the new igniter, install the supplied wiring kit, and route the harness clear of hot surfaces.
Test — Restore power and watch a full ignition cycle for a strong, even glow and reliable light-off.

Signs You Need a Replacement

Furnace clicks but burners never light
Visible cracks or white blistering on the element
No glow during the ignition sequence
Intermittent no-heat or lockout after several cycles

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS120LRAB0AAA — OEM 1171306 + Wiring | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120LRAB0AAA — OEM 1171306 + Wiring | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120LRAB0AAA — OEM 1171306 + Wiring | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu