What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120LEBA0AGAA – With Wiring Harness | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120LEBA0AGAA – With Wiring Harness | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS120LEBA0AGAA – With Wiring Harness | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS120LEBA0AGAA – With Wiring Harness | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit for the ICP RGS120LEBA0AGAA furnace includes the ignitor (part 1171306) and its matched wiring harness (part 1188370). On a heat call the control board powers the igniter, which glows to roughly 1,800–2,500°F to light the burners. Hot surface igniters are brittle and are the most common no-heat failure — they crack from age, thermal cycling, or being touched with bare fingers. The included wiring kit ensures a clean, corrosion-free electrical connection so the new igniter gets full voltage.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot surface igniter
Brand	ICP / Heil / Tempstar
Includes	Igniter + wiring harness
Application	Gas furnace burner ignition
Fitment	OEM replacement

Compatibility

Designed for the ICP / Tempstar / Heil RGS120LEBA0AGAA gas furnace and related models using this OEM hot surface ignition system.

Installation Guide

Safety First – Disconnect power, verify zero voltage with a multimeter, and shut off the gas during service.
Access – Remove the burner compartment service panel.
Document – Photo the igniter position and wiring routing before disconnecting.
Remove – Unplug the igniter harness, unfasten the mounting screw, and lift out the cracked igniter (handle by the bracket only).
Install – Mount the new igniter without touching the element, then connect the new wiring kit per your photo.
Test – Restore gas and power, call for heat, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace blower runs but no heat / no flame
Visible crack or break in the igniter element
Igniter does not glow on a heat call
Repeated ignition lockouts after a few cycles

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS120LEBA0AGAA – With Wiring Harness | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120LEBA0AGAA – With Wiring Harness | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120LEBA0AGAA – With Wiring Harness | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu