What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120HFCB0AAA — Silicon Nitride with Wiring Harness | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120HFCB0AAA — Silicon Nitride with Wiring Harness | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS120HFCB0AAA — Silicon Nitride with Wiring Harness | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS120HFCB0AAA — Silicon Nitride with Wiring Harness | Ships Today
Brand: ICP
SKU: 1171306
Price: 44.20 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit replaces the ignition component on the ICP / Tempstar / Heil RGS120HFCB0AAA gas furnace. It bundles the silicon-style hot surface igniter (OEM 1171306) with the matching igniter wiring kit (OEM 1188370) so you have the harness and connector needed for a clean swap. The igniter glows to roughly 1,800–2,500°F on a 120V call for heat to light the burner gas. When it cracks, carbon-fouls, or fails open, the furnace blower may run but you get no flame, repeated ignition lockouts, or a unit that short-cycles on a failed light. Replacing the igniter is the single most common furnace no-heat repair.

Specifications

Spec	Value
Part Number	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Voltage	120V
Fit	OEM Replacement
Includes	Igniter + wiring harness kit

Compatibility

Engineered for the ICP-family RGS120HFCB0AAA gas furnace and shared platform models sold under the Tempstar, Heil, Comfortmaker, and Arcoaire brands. Always confirm your model and serial before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter and shut off gas.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter bracket and wiring connector before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and lift the fragile igniter straight out without touching the glow element.
Install — Seat the new igniter in the bracket, install the new wiring kit, and reconnect per your photo. Handle the element by the ceramic base only.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light within one cycle.

Signs You Need a Replacement

Furnace ignites no flame despite blower operation
Visible cracks or white/blistered spots on the igniter element
Repeated ignition lockouts or short-cycling on startup
No glow visible through the inspection port on a heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGS120HFCB0AAA — Silicon Nitride with Wiring Harness | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120HFCB0AAA — Silicon Nitride with Wiring Harness | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120HFCB0AAA — Silicon Nitride with Wiring Harness | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu