What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120HDBB0AAA — Igniter + Wiring | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120HDBB0AAA — Igniter + Wiring | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS120HDBB0AAA — Igniter + Wiring | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS120HDBB0AAA — Igniter + Wiring | Ships Today
Brand: ICP
SKU: 1171306
Price: 49.40 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This kit is the genuine OEM hot surface igniter (ICP part number 1171306, "IGNITOR") paired with the matching igniter wiring kit (ICP part number 1188370, "WIRING KIT IGNITER") for the ICP/Heil/Tempstar RGS120HDBB0AAA gas furnace. On a call for heat the control board sends line voltage (120V) to the igniter, which glows red-hot to light the burners. Hot surface igniters are brittle and degrade with every heating cycle, eventually cracking or failing to reach ignition temperature — the most common reason a furnace clicks and tries to start but never lights. Replacing the igniter together with fresh wiring/connector hardware restores a reliable connection and avoids repeat failures from a brittle or heat-damaged harness.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot surface igniter
Operating Voltage	120 VAC
Brand	ICP / Heil / Tempstar

Compatibility

Direct-fit OEM replacement for the ICP/Heil/Tempstar RGS120HDBB0AAA and related ICP-family furnaces using this hot surface igniter. Confirm the igniter part number and mounting bracket style match before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter; the igniter is fragile, so never touch the element with bare fingers.
Access — Remove the burner compartment panel.
Document — Photograph the igniter position and connector routing before removing anything.
Remove — Unplug the igniter connector and unscrew the old igniter from its bracket.
Install — Mount the new igniter (handling only the ceramic base), then connect the new wiring kit/connector per your photo.
Test — Restore power, call for heat, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace clicks and attempts ignition but burners never light.
Igniter shows no glow, or a visibly cracked/broken element.
Repeated lockouts on ignition failure.
Brittle, melted, or burnt igniter connector and wiring.

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$49.40

Frequently Asked Questions

Does this Igniter fit my ICP RGS120HDBB0AAA — Igniter + Wiring | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120HDBB0AAA — Igniter + Wiring | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120HDBB0AAA — Igniter + Wiring | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu