ICP Hot Surface Igniter Kit for RGS102STBB0AAA — OEM 1171306 with Wiring Harness | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This is the genuine OEM hot surface igniter assembly for the ICP / Tempstar / Heil RGS102STBB0AAA gas furnace, supplied as OEM part 1171306 (IGNITOR) together with wiring kit 1188370 (WIRING KIT IGNITER). The hot surface igniter is the component that glows red-hot on a heat call to ignite the gas at the burners. It is one of the most common furnace failure points: the silicon-carbide or silicon-nitride element is brittle and degrades with every ignition cycle until it finally cracks and stops glowing. When that happens the furnace will run the inducer and call for heat but never light, leaving you with no warm air. Installing the matched igniter and wiring kit together restores reliable, code-compliant ignition.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (Igniter), 1188370 (Wiring Kit) |
| Type | Hot Surface Igniter |
| Brand | ICP / Tempstar / Heil |
| Fits Model | RGS102STBB0AAA |
| Application | Gas Furnace Ignition |
| Fitment | OEM Replacement |
Compatibility
Designed as the factory replacement for the ICP / Tempstar / Heil model RGS102STBB0AAA gas furnace. The included wiring kit ensures the correct plug and harness for a direct, no-splice connection. Always confirm the OEM part number on your existing igniter before ordering.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker, and shut off the gas. Verify zero voltage with a multimeter.
- Access — Remove the furnace burner/control compartment service panel.
- Document — Photo the igniter mounting bracket and wiring connector before disconnecting.
- Remove — Unplug the igniter harness, remove the mounting screw, and lift out the old igniter without touching the new element with bare hands.
- Install — Mount the new igniter so the element sits in the burner flame path, then connect the new wiring kit per your photo.
- Test — Restore gas and power, call for heat, and confirm the igniter glows and burners light within the normal ignition sequence.
Signs You Need a Replacement
- Furnace inducer runs but burners never ignite (no warm air)
- Igniter no longer glows orange/red on a heat call
- Visible cracks, blistering, or white deposits on the element
- Repeated lockouts after several failed ignition attempts
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days