What igniter fits my ICP furnace?

The correct replacement for ICP model RGS102SRBA0AAA — OEM 1171306 + Wiring | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102SRBA0AAA — OEM 1171306 + Wiring | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS102SRBA0AAA — OEM 1171306 + Wiring | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS102SRBA0AAA — OEM 1171306 + Wiring | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit pairs the igniter element (part number 1171306) with the matching igniter wiring kit (part number 1188370) for the ICP / Tempstar / Heil RGS102SRBA0AAA gas furnace. On a heat call the control board energizes the igniter, which glows white-hot to ignite the gas at the burners. Hot surface igniters are brittle and degrade over thousands of heating cycles, eventually cracking or losing the ability to reach ignition temperature. The included wiring kit replaces the heat-stressed pigtail/connector that commonly fails alongside the element, restoring a clean, reliable ignition sequence.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Includes	Igniter element + wiring harness kit
Fitment	OEM

Compatibility

Designed for the RGS102SRBA0AAA and the ICP, Tempstar, Heil, Comfortmaker, and Arcoaire furnaces that use this igniter and harness combination. Handle the element by its base only — skin oils and direct contact shorten igniter life.

Installation Guide

Safety First — Turn off gas and disconnect power at the furnace switch; verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter mounting and harness routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and lift out the cracked element without touching the new one's silicon-carbide tip.
Install — Mount the new igniter and connect the new wiring kit, keeping the harness clear of hot surfaces and sharp edges.
Test — Restore gas and power, start a heat call, and confirm the igniter glows and the burners light within the normal ignition window.

Signs You Need a Replacement

No-heat call with no glow from the igniter
Visible cracks or chips in the igniter element
Furnace locks out after several failed ignition attempts
Intermittent ignition or delayed, rough burner lighting

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS102SRBA0AAA — OEM 1171306 + Wiring | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS102SRBA0AAA — OEM 1171306 + Wiring | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS102SRBA0AAA — OEM 1171306 + Wiring | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu