ICP Hot Surface Igniter Kit for RGS102SECA0AAA — OEM 1171306 | Ships Today

Overview

This OEM hot surface igniter (part #1171306) with its matched wiring kit (part #1188370) ignites the burners in your ICP Tempstar Heil RGS102SECA0AAA gas furnace. On a call for heat the igniter glows white-hot and lights the gas at the burner. Igniters are brittle and degrade with every heating cycle — they crack, develop hairline fractures, or lose resistance until they no longer reach ignition temperature. The result is no heat, repeated ignition lockouts, or a furnace that cycles on the limit. Installing the genuine igniter plus the included wiring harness ensures a clean electrical connection and reliable startup.

Specifications

Compatibility

Fits the ICP Tempstar Heil RGS102SECA0AAA and compatible ICP-family gas furnaces using this hot surface igniter assembly. Handle the igniter element by the ceramic base only — never touch the silicon nitride/carbide element.

Installation Guide

1. Safety First — Disconnect power to the furnace. Verify zero voltage with a multimeter.
2. Access — Remove the burner compartment access panel.
3. Document — Photograph the igniter mounting and wiring connector before removal.
4. Remove — Unplug the igniter harness, remove the mounting screw(s), and carefully withdraw the old igniter without touching the element.
5. Install — Mount the new igniter, route and connect the included wiring kit, and confirm the element sits correctly over the burner.
6. Test — Restore power, start a heat call, and verify the igniter glows and lights the burners.

Signs You Need a Replacement

• No heat with repeated ignition lockouts
• Igniter does not glow on a call for heat
• Visible cracks or breaks in the igniter element
• Furnace short-cycles or trips on the high limit

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.