ICP Hot Surface Igniter Kit for RGS102SEAA0AAA — With Wiring Harness | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter kit (OEM igniter #1171306 with wiring kit #1188370) is the ignition source for the ICP / Tempstar / Heil RGS102SEAA0AAA gas furnace. The hot surface igniter glows to roughly 1,800–2,500°F when energized, lighting the burner gas at the start of each heat cycle. Because the element is a brittle silicon-carbide or silicon-nitride material, it is one of the most common furnace failure points — it can crack from thermal cycling, contamination from oily fingerprints, or simple age. When the igniter fails, the furnace blower may run but no flame lights, you may hear repeated ignition attempts followed by a lockout, or the control board flashes an ignition-failure fault. This kit includes the matched wiring harness for a clean, complete replacement.
Specifications
| Spec | Value |
|---|---|
| OEM Igniter Part | 1171306 |
| OEM Wiring Kit | 1188370 |
| Type | Hot Surface Igniter |
| Brand | ICP (Tempstar / Heil) |
| Application | Gas Furnace Ignition |
| Fitment | OEM Replacement |
Compatibility
Designed as the factory ignition replacement for the ICP RGS102SEAA0AAA and compatible Tempstar, Heil, and Comfortmaker gas furnaces using this igniter and harness assembly. Verify the mounting orientation and connector against your existing igniter.
Installation Guide
- Safety First — Shut off gas and power at the furnace; verify zero voltage at the igniter leads with a multimeter.
- Access — Remove the furnace burner compartment door.
- Document — Photograph the igniter position, bracket, and wire routing before disconnecting.
- Remove — Unplug the igniter harness, remove the mounting screw, and withdraw the old igniter without touching the new element with bare fingers.
- Install — Mount the new igniter using the supplied wiring kit, handling the element only by its ceramic base.
- Test — Restore gas and power, start a heat call, and confirm the igniter glows and lights the burners within the trial period.
Signs You Need a Replacement
- Blower runs but burners never light
- Repeated ignition clicks/attempts ending in lockout
- Visible cracks, breaks, or white spots on the igniter element
- Control board flashing an ignition-failure or flame fault code
Shipping & Returns
Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days