What igniter fits my ICP furnace?

The correct replacement for ICP model RGS102LTCA0AAA – With Wiring Harness | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102LTCA0AAA – With Wiring Harness | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS102LTCA0AAA – With Wiring Harness | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS102LTCA0AAA – With Wiring Harness | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit for the ICP/Heil/Tempstar RGS102LTCA0AAA gas furnace includes the igniter (part 1171306) and the matching igniter wiring kit (part 1188370). On each heat call the control board energizes the igniter, which glows red-hot to light the burners; the included wiring harness ensures a clean, correct electrical connection to the board. Hot surface igniters are brittle and wear out — the silicon-carbide or nitride element develops hairline cracks and eventually fails, leaving the furnace unable to light. Bundling the wiring kit lets you replace a brittle or corroded harness at the same time, avoiding repeat failures. Use the OEM igniter to match the original element type and resistance.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Includes	Igniter + Wiring Harness Kit
Fit	OEM

Compatibility

Designed for the ICP/Heil/Tempstar RGS102LTCA0AAA gas furnace and related Comfortmaker-family models using this hot surface igniter assembly. Verify igniter style and mounting before ordering.

Installation Guide

Safety First – Shut off gas, disconnect power, and verify zero voltage with a multimeter.
Access – Remove the furnace burner-compartment panel.
Document – Photograph the igniter position and harness routing before disconnecting.
Remove – Unplug the harness, unscrew the old igniter, and handle the new element only by its ceramic base — never touch the hot surface.
Install – Mount the new igniter, connect the new wiring kit, and route the harness clear of hot surfaces per your photo.
Test – Restore gas and power, call for heat, and confirm the igniter glows and lights the burners.

Signs You Need a Replacement

Furnace clicks but never lights (no glow)
Visible cracks or breaks in the igniter element
Igniter glows but burners fail to ignite
Frayed, brittle, or melted igniter wiring

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS102LTCA0AAA – With Wiring Harness | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS102LTCA0AAA – With Wiring Harness | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS102LTCA0AAA – With Wiring Harness | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu