ICP Hot Surface Igniter Kit for RGS102LTAB0AAA — With Wiring Harness | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter kit for the ICP/Heil/Tempstar RGS102LTAB0AAA gas furnace includes the igniter element (Part No. 1171306) and the matched wiring kit (Part No. 1188370). On each call for heat, the furnace control board energizes the igniter, which glows to roughly 2,500°F and lights the gas at the burners. The hot surface igniter is one of the most common furnace failure points because the brittle silicon-carbide or silicon-nitride element degrades with every heating cycle. Symptoms of a failed igniter include no heat, a furnace that clicks and tries to light but never produces flame, a visibly cracked or dark igniter that never glows, or a unit that locks out after several failed ignition attempts. The included wiring kit ensures a clean, correct electrical connection during replacement.
Specifications
| Spec | Value |
|---|---|
| OEM Part Numbers | 1171306 (Igniter), 1188370 (Wiring Kit) |
| Type | Hot Surface Igniter |
| Brand | ICP / Heil / Tempstar |
| Includes | Igniter element + wiring harness kit |
| Application | Gas Furnace Ignition |
Compatibility
Built as the factory replacement for the ICP/Heil/Tempstar RGS102LTAB0AAA gas furnace. Because hot surface igniters are mounting- and connector-specific, the included wiring kit makes this a complete drop-in service part for the matched model. Verify the igniter mounting bracket and connector against your existing part before installing.
Installation Guide
- Safety First — Disconnect power to the furnace and verify zero voltage with a multimeter; shut off the gas supply.
- Access — Remove the furnace burner-compartment service panel.
- Document — Photograph the igniter position and its wiring before disconnecting.
- Remove — Unplug the igniter connector and remove the mounting screw. Handle by the ceramic base only — never touch the glowing element.
- Install — Mount the new igniter, install the wiring kit, and seat the connector firmly. Do not touch the element with bare fingers.
- Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light within the trial period.
Signs You Need a Replacement
- No heat; furnace tries to light but never ignites.
- Igniter never glows or glows weakly.
- Visible cracks, chips, or dark spots on the element.
- Furnace locks out after repeated failed ignition attempts.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days