ICP Hot Surface Igniter Kit for RGS102LFAA0AAA — Includes Wiring Harness | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter kit (part 1171306) for the ICP/Tempstar/Heil RGS102LFAA0AAA gas furnace ignites the burner gas at the start of every heat cycle. The kit ships complete with igniter wiring kit 1188370 so you can replace a brittle or cracked harness at the same time. The igniter glows bright orange when energized by the control board; if it fails to reach temperature, the gas valve will not open and the furnace will lock out on ignition failure. Hot surface igniters are the single most common no-heat failure on this furnace family because the silicon-carbide or silicon-nitride element grows fragile with thermal cycling and is easily fractured by handling or vibration.
Specifications
| Spec | Value |
|---|---|
| Igniter Part Number | 1171306 |
| Wiring Kit Part Number | 1188370 |
| Type | Hot Surface Igniter |
| Brand | ICP / Tempstar / Heil |
| Fit | OEM Replacement |
| Application | Gas Furnace Ignition |
Compatibility
Engineered for the ICP/Tempstar/Heil RGS102LFAA0AAA furnace. ICP-family equipment (Comfortmaker, Heil, Tempstar, Arcoaire) frequently shares igniter assemblies — confirm your existing part number matches 1171306 before ordering.
Installation Guide
- Safety First — Shut off gas and disconnect electrical power at the furnace switch and breaker. Verify zero voltage with a multimeter.
- Access — Remove the burner/blower service panel.
- Document — Photograph the igniter bracket position and wire routing before disconnecting.
- Remove — Unplug the igniter connector, remove the mounting screw, and lift the old igniter out. Handle the new element by the ceramic base only — never touch the glow surface.
- Install — Mount the new igniter, route and connect the new wiring kit, and confirm the element sits correctly over the burner.
- Test — Restore gas and power, then run a heat cycle and watch for a clean glow, gas light-off, and steady flame.
Signs You Need a Replacement
- Furnace ignites intermittently or locks out on ignition failure
- No glow visible through the inspection port during a call for heat
- Visible cracks, chips, or white/gray spots on the igniter element
- Repeated 3-flash or ignition-fault codes at the control board
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days