ICP Hot Surface Igniter Kit for RGS102HFBA0AAA — Igniter + Wiring | Ships Today

Overview

This kit includes a genuine OEM hot surface igniter (ICP part number 1171306) plus the matching igniter wiring kit/harness (part 1188370) for ICP / Tempstar / Heil gas furnaces. On a call for heat, the control board sends voltage to the igniter, which glows hot to ignite the gas at the burners. Igniters are brittle and degrade over many heating cycles. Common failure symptoms include no ignition (furnace blows cold air), the igniter glowing but not lighting the burners, or a furnace that locks out after several failed ignition attempts. The included wiring kit ensures a clean, reliable connection at the igniter.

Specifications

Compatibility

Direct OEM replacement for ICP, Tempstar, Heil and Comfortmaker gas furnaces using this hot surface igniter, including model RGS102HFBA0AAA. Handle the igniter only by its base — never touch the silicon-carbide element.

Installation Guide

1. Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter.
2. Access — Remove the burner compartment panel.
3. Document — Photograph the igniter position and wiring connector.
4. Remove — Unplug the igniter harness, remove the mounting screw, and carefully withdraw the old igniter.
5. Install — Mount the new igniter by its base, install the new wiring kit, and reconnect — do not touch the element.
6. Test — Restore power and confirm the igniter glows and lights the burners on a heat call.

Signs You Need a Replacement

• Furnace blows cold air — no ignition
• Igniter glows but burners never light
• Visible cracks or breaks in the element
• Repeated ignition lockouts after several attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.