ICP Hot Surface Igniter Kit for RGS101STAA0AAAA — With Wiring Harness | Ships Today

Overview

This OEM hot surface igniter kit for the ICP/Tempstar/Heil RGS101STAA0AAAA gas furnace includes the igniter (part #1171306) and the matched igniter wiring kit (part #1188370). On a call for heat, the control board sends line voltage to the igniter, which glows red-hot to ignite the gas at the burners. Hot surface igniters are made of brittle silicon carbide or silicon nitride and are the single most common no-heat failure on modern furnaces. Typical symptoms are a furnace that clicks and tries to light but never fires, a glowing igniter that produces no flame, a cracked or visibly broken element, or an igniter that never lights at all. The included wiring kit ensures a clean, OEM-spec connection to the harness.

Specifications

Compatibility

Fits the ICP/Tempstar/Heil/Comfortmaker RGS101STAA0AAAA and matched furnace platforms that use this hot surface igniter and harness. Verify the igniter mounting style and connector against your existing part before installing.

Installation Guide

1. Safety First — Shut off gas and power, then verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the igniter position and wiring before disconnecting.
4. Remove — Unplug the harness and unscrew the old igniter, handling it only by the ceramic base — never touch the element.
5. Install — Mount the new igniter without touching the silicon element and connect the new wiring kit.
6. Test — Restore gas and power and watch a full ignition cycle to confirm the burners light.

Signs You Need a Replacement

• Furnace clicks and attempts to ignite but never lights
• Igniter glows but no flame appears
• Visible crack or break in the element
• No glow at all on a heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.