What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101LTBB0AAAA — With Wiring Harness | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101LTBB0AAAA — With Wiring Harness | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS101LTBB0AAAA — With Wiring Harness | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS101LTBB0AAAA — With Wiring Harness | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.70 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit pairs the genuine igniter (part number 1171306) with its matched wiring kit (part number 1188370) for the ICP / Tempstar / Heil RGS101LTBB0AAAA gas furnace. On a heat call, the control board sends voltage to the igniter element, which glows white-hot to light the burners. The igniter is one of the most failure-prone parts in any modern furnace — the brittle silicon-carbide element cracks from thermal cycling, age, or being touched during service. Including the wiring kit ensures a clean, connector-matched installation and eliminates the brittle, heat-degraded leads that often fail alongside the element. The result is fast, reliable ignition every cycle.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Includes	Igniter element + wiring harness kit
Fitment	OEM exact-fit
Application	Gas furnace ignition

Compatibility

Built for the ICP RGS101LTBB0AAAA and shared across Tempstar, Heil, Comfortmaker, and other ICP-family RGS-series furnaces that use this hot surface igniter and connector. Verify the igniter style and harness plug against your unit before installing.

Installation Guide

Safety First — Shut off gas and disconnect power at the furnace switch; verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter mounting position and harness routing before disconnecting.
Remove — Unplug the harness, remove the igniter mounting screw, and lift out the cracked element — handle the new one only by its ceramic base.
Install — Mount the new igniter, route and connect the new wiring kit per your photo, and confirm it sits in the burner flame path.
Test — Restore gas and power, run a heat cycle, and verify the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace clicks but burners never light (no glow)
Visible crack or break in the igniter element
Intermittent ignition or repeated lockouts
Igniter glows weakly or unevenly

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP RGS101LTBB0AAAA — With Wiring Harness | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101LTBB0AAAA — With Wiring Harness | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101LTBB0AAAA — With Wiring Harness | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu