What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101LECA0AAA – With Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101LECA0AAA – With Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS101LECA0AAA – With Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS101LECA0AAA – With Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 44.20 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit for the ICP/Tempstar/Heil RGS101LECA0AAA includes the igniter (part 1171306) and the matching igniter wiring kit (part 1188370). The hot surface igniter is the heart of the furnace ignition sequence: on a call for heat, the control board energizes the igniter, which glows red-hot to ignite the gas as it enters the burners. Igniters are brittle silicon nitride or silicon carbide elements that degrade with every heating cycle and eventually crack or lose conductivity, producing a no-heat condition. The included wiring kit ensures a clean, correct electrical connection during replacement.

Specifications

Spec	Value
Part Number (Igniter)	1171306
Part Number (Wiring Kit)	1188370
Type	Hot Surface Igniter
Brand	ICP
Application	Gas Furnace Ignition

Compatibility

Built as a direct OEM replacement for the ICP RGS101LECA0AAA gas furnace and other Tempstar, Heil, Comfortmaker, and Day & Night models sharing this igniter platform. Verify the part number against your unit before installing.

Installation Guide

Safety First – Shut off gas and disconnect power, then verify zero voltage with a multimeter.
Access – Remove the burner/service panel to reach the igniter.
Document – Photograph the igniter position and wiring before disconnecting.
Remove – Unplug the igniter harness and remove the mounting screw; handle the element only by the ceramic base, never the glowing tip.
Install – Mount the new igniter, route and connect the supplied wiring kit, and confirm the element does not touch metal.
Test – Restore gas and power and watch a full ignition cycle to confirm clean light-off.

Signs You Need a Replacement

Furnace blower runs but no heat / no flame
Igniter no longer glows or glows weakly
Visible crack or break in the igniter element
Repeated ignition lockouts on the control board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGS101LECA0AAA – With Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101LECA0AAA – With Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101LECA0AAA – With Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu