What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101LDCA0AAA — OEM 1171306 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101LDCA0AAA — OEM 1171306 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS101LDCA0AAA — OEM 1171306 | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS101LDCA0AAA — OEM 1171306 | Ships Today
Brand: ICP
SKU: 1171306
Price: 41.60 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part number 1171306), bundled with the matching igniter wiring kit (part number 1188370), lights the burners on the ICP/Tempstar/Heil RGS101LDCA0AAA gas furnace. On each heat call, the control board energizes the igniter; it glows white-hot and ignites the gas as the valve opens. Hot surface igniters are brittle and degrade over time — micro-cracks, contamination, and normal aging cause them to fail open. The result is no heat, repeated ignition lockouts, or a furnace that clicks the gas valve but never lights. The included wiring kit ensures a clean, correct electrical connection.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Fits Model	RGS101LDCA0AAA
Fitment	OEM direct replacement

Compatibility

Designed for the ICP/Tempstar/Heil RGS101LDCA0AAA furnace and related RGS-series models that use this hot surface igniter and connector. Match the igniter style and mounting before installing.

Installation Guide

Safety First — Disconnect power to the furnace and verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position and wiring routing before disconnecting.
Remove — Unplug the igniter harness and remove the mounting screw; handle the old igniter by the ceramic base only.
Install — Mount the new igniter (never touch the element), connect the new wiring kit, and confirm proper gap to the burner.
Test — Restore power and run a full heat cycle to confirm glow, ignition, and flame proving.

Signs You Need a Replacement

No heat / furnace fails to ignite
Repeated ignition lockouts after several tries
Igniter does not glow on a heat call
Visible cracks or breaks in the igniter element

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$41.60

Frequently Asked Questions

Does this Igniter fit my ICP RGS101LDCA0AAA — OEM 1171306 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101LDCA0AAA — OEM 1171306 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101LDCA0AAA — OEM 1171306 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu