What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101HTAB0AAAA — OEM Ignitor + Wiring | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101HTAB0AAAA — OEM Ignitor + Wiring | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS101HTAB0AAAA — OEM Ignitor + Wiring | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS101HTAB0AAAA — OEM Ignitor + Wiring | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter lights the burners on your ICP RGS101HTAB0AAAA gas furnace. On each heat call the control board sends voltage to the igniter, which glows white-hot to ignite the gas at the burners. This listing covers the igniter 1171306 and the matching igniter wiring kit 1188370, so you have the connector and harness needed for a clean replacement. Hot surface igniters are brittle and degrade with every heating cycle — a cracked or worn-out igniter is the single most common cause of no-heat furnace failures.

Specifications

Spec	Value
OEM Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Application	Gas Furnace Ignition
Includes	Igniter + Igniter Wiring Kit
Fitment	OEM

Compatibility

Direct-fit replacement for the ICP / Tempstar / Heil / Comfortmaker RGS101HTAB0AAAA gas furnace. The included wiring kit ensures the connector matches your furnace harness even if the original plug is brittle or damaged.

Installation Guide

Safety First — Shut off gas and electrical power to the furnace and verify zero voltage with a multimeter.
Access — Remove the burner compartment door.
Document — Photograph the igniter position and wire routing before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and withdraw the old igniter without touching the silicon-carbide element.
Install — Mount the new igniter (handle by the ceramic base only), then connect the new wiring kit.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace blows cold air — no ignition on a heat call
Visible crack or break in the igniter element
Igniter glows weakly or not at all
Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS101HTAB0AAAA — OEM Ignitor + Wiring | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101HTAB0AAAA — OEM Ignitor + Wiring | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101HTAB0AAAA — OEM Ignitor + Wiring | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu