What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101HSBA0AAAA — Igniter & Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101HSBA0AAAA — Igniter & Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS101HSBA0AAAA — Igniter & Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS101HSBA0AAAA — Igniter & Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM hot surface igniter (OEM #1171306) paired with its igniter wiring kit (OEM #1188370) for the ICP (Tempstar / Heil) RGS101HSBA0AAAA gas furnace. The hot surface igniter glows to a high temperature when energized at the start of each heat cycle, igniting the gas at the burners. The included wiring kit provides the correct OEM connector and harness so the igniter wires up cleanly to the control board. Igniters are brittle and wear out — a cracked element or open circuit is one of the most common causes of no-heat calls. Installing a fresh OEM igniter and wiring kit restores fast, reliable ignition and reduces nuisance lockouts.

Specifications

Spec	Value
OEM Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot surface igniter
Brand	ICP / Tempstar / Heil
Includes	Igniter element + wiring harness/connector
Application	Gas furnace burner ignition

Compatibility

Designed for the ICP Tempstar Heil RGS101HSBA0AAAA and related ICP-family gas furnaces using the same igniter mount and connector. Confirm igniter style before ordering.

Installation Guide

Safety First — Shut off gas and disconnect power; verify zero voltage with a multimeter.
Access — Remove the burner / service panel.
Document — Photograph the igniter position and wiring routing before disconnecting.
Remove — Unplug the harness and unscrew the old igniter, handling only by the ceramic base — never touch the element.
Install — Mount the new igniter, connect the new wiring kit, and route the harness clear of hot surfaces.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and burners light.

Signs You Need a Replacement

No glow at the igniter on a heat call
Cracked or chipped igniter element
Furnace locks out after failed ignition attempts
Visible damage or burns on the igniter wiring

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS101HSBA0AAAA — Igniter & Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101HSBA0AAAA — Igniter & Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101HSBA0AAAA — Igniter & Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu