What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101HRAB0AAAA — with Wiring Harness | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101HRAB0AAAA — with Wiring Harness | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS101HRAB0AAAA — with Wiring Harness | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS101HRAB0AAAA — with Wiring Harness | Ships Today
Brand: ICP
SKU: 1171306
Price: 51.94 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part 1171306) with matching wiring kit (part 1188370) restores reliable ignition to the ICP Heil Tempstar RGS101HRAB0AAAA gas furnace. On a call for heat, the control board energizes the igniter, which glows red-hot to light the burners. The included wiring kit ensures a clean, factory-correct connection so the igniter receives proper voltage. Hot surface igniters are brittle silicon-carbide or nitride elements that crack and fail with age and thermal cycling — a failed igniter is the single most common cause of a no-heat furnace.

Specifications

Spec	Value
Part Number	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter with Wiring Harness
Brand	ICP (Heil / Tempstar)
Fitment	RGS101HRAB0AAAA gas furnace
Element	Hot surface (silicon carbide/nitride)

Compatibility

Designed for the ICP / Heil / Tempstar RGS101HRAB0AAAA furnace and related RGS-series models using a hot surface ignition system. Confirm your furnace uses a hot surface igniter (not a spark or standing pilot) before ordering.

Installation Guide

Safety First — Disconnect power and shut off gas, then verify zero voltage with a multimeter.
Access — Remove the burner compartment access panel.
Document — Photograph the igniter position and wiring routing before removal.
Remove — Unfasten the mounting screw and unplug the old igniter; avoid touching the new element with bare fingers.
Install — Mount the new igniter, connect the wiring kit, and route leads clear of the burner flame path per your photo.
Test — Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and burners light.

Signs You Need a Replacement

No heat — burners never ignite
Igniter does not glow during the ignition cycle
Visible cracks or breaks in the igniter element
Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS101HRAB0AAAA — with Wiring Harness | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101HRAB0AAAA — with Wiring Harness | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101HRAB0AAAA — with Wiring Harness | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu