ICP Hot Surface Igniter Kit for RGS101HFBB0AAAA — Furnace Ignitor with Wiring Harness | Ships Today

Overview

This OEM hot surface igniter (P/N 1171306) lights the gas burners on your ICP / Tempstar / Heil RGS101HFBB0AAAA furnace. On a call for heat the control board sends line voltage to the igniter, which glows red-hot and ignites the gas as the valve opens. The matching wiring kit (P/N 1188370) provides the correct connector and lead harness so the new igniter plugs in cleanly. Hot surface igniters are a wear item — the brittle silicon-carbide or silicon-nitride element eventually cracks or burns out, leaving the furnace with no flame and no heat.

Specifications

Compatibility

Designed for the ICP / Tempstar / Heil RGS101HFBB0AAAA and other RGS-series gas furnaces using this igniter platform. The included wiring kit ensures a plug-and-play connection. Verify the igniter shape and mounting tab against your existing unit before installing.

Installation Guide

1. Safety First — Shut off the gas, disconnect furnace power, and verify zero voltage with a multimeter.
2. Access — Remove the burner compartment door / service panel.
3. Document — Photograph the igniter position and wiring before disconnecting.
4. Remove — Unplug the igniter lead, remove the mounting screw, and carefully withdraw the old igniter — never touch the element with bare fingers.
5. Install — Mount the new igniter, attach the wiring kit, and seat the connector fully.
6. Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

• Furnace blower runs but burners never ignite (no heat)
• Igniter does not glow during the heating cycle
• Visible cracks or breaks in the igniter element
• Control board locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.