What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091SRBB0AAAA — with Wiring Harness | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091SRBB0AAAA — with Wiring Harness | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS091SRBB0AAAA — with Wiring Harness | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS091SRBB0AAAA — with Wiring Harness | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter kit for the ICP Tempstar Heil RGS091SRBB0AAAA furnace includes the ignitor (part 1171306) and the matching igniter wiring kit/harness (part 1188370). On a call for heat, the control board sends 120V to the igniter, which glows white-hot to ignite the burner gas. Hot surface igniters are brittle and degrade with every cycle — a cracked or weakened element is the single most common cause of no-heat furnace failures. Including the wiring kit ensures clean, corrosion-free connections and a complete, reliable repair.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot surface igniter with harness
Brand	ICP / Tempstar / Heil
Operating Voltage	120 VAC
Fitment	OEM

Compatibility

Designed for the ICP Tempstar Heil RGS091SRBB0AAAA gas furnace and related ICP-family models using a 120V hot surface igniter with this connector style. Confirm igniter shape and harness plug against your existing part before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photo the igniter bracket position and harness routing before disconnecting.
Remove — Unplug the harness, remove the igniter mounting screw, and carefully withdraw the fragile element. Handle the new igniter by its ceramic base only — never touch the element.
Install — Mount the new igniter, connect the new wiring kit, and route the harness clear of hot surfaces per your photo.
Test — Restore power, call for heat, and confirm the igniter glows and the burners light within the normal sequence.

Signs You Need a Replacement

Furnace blows cold air — no ignition on a call for heat
Igniter visibly cracked or fails to glow
Repeated lockouts after several ignition attempts
Burnt or melted igniter wiring connector

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS091SRBB0AAAA — with Wiring Harness | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091SRBB0AAAA — with Wiring Harness | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091SRBB0AAAA — with Wiring Harness | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu