What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091SEAB0AAAA — OEM 1171306 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091SEAB0AAAA — OEM 1171306 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS091SEAB0AAAA — OEM 1171306 | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS091SEAB0AAAA — OEM 1171306 | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.70 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part number 1171306), paired with its matching wiring kit (1188370), is the component that lights the burners in your ICP Tempstar Heil RGS091SEAB0AAAA gas furnace. On each heat call the control board sends voltage to the igniter, which glows to roughly 1,800–2,500°F and ignites the gas as the valve opens. Igniters are brittle and degrade with every cycle — the silicon-carbide or silicon-nitride element develops hairline cracks, hot spots, or simply burns out. The included wiring kit refreshes the connector and harness so a corroded or melted plug doesn't cause intermittent no-heat faults.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Application	Gas Furnace Ignition
Fit	OEM Exact Replacement

Compatibility

Direct OEM fit for the ICP Tempstar Heil RGS091SEAB0AAAA furnace and related ICP-family models using this igniter and connector. Verify your part number and connector style before ordering.

Installation Guide

Safety First — Disconnect power to the furnace and verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter mounting position and harness routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw(s); handle the old element by its ceramic base only.
Install — Mount the new igniter without touching the glow element, install the new wiring kit, and route the harness per your photo.
Test — Restore power, start a heat cycle, and confirm the igniter glows and lights the burners promptly.

Signs You Need a Replacement

Furnace blows cold air or short-cycles on no-heat lockout
Igniter doesn't glow when the board calls for heat
Visible cracks, blistering, or white-gray spots on the element
Burners delay lighting or ignite with a rollout/whoomp

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP RGS091SEAB0AAAA — OEM 1171306 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091SEAB0AAAA — OEM 1171306 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091SEAB0AAAA — OEM 1171306 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu