What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091LSBB0AAAA — OEM Ignitor + Wiring Harness | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091LSBB0AAAA — OEM Ignitor + Wiring Harness | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS091LSBB0AAAA — OEM Ignitor + Wiring Harness | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS091LSBB0AAAA — OEM Ignitor + Wiring Harness | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit for the ICP (International Comfort Products) RGS091LSBB0AAAA gas furnace includes the genuine ignitor (part #1171306) and the matching igniter wiring kit (part #1188370). On each heat call the control board sends power to the igniter, which glows red-hot to light the gas at the burners. Hot surface igniters are brittle and are one of the most common furnace failures — they crack from thermal cycling, contamination, or rough handling. A failed igniter is the usual cause of a furnace that clicks, draws the inducer, but produces no flame and no heat. Including the fresh wiring harness prevents intermittent connection faults that can mimic an igniter failure.

Specifications

Spec	Value
Part Numbers	1171306 (Ignitor), 1188370 (Wiring Kit)
Type	Hot Surface Igniter with Wiring Harness
Brand	ICP (Heil / Tempstar)
Function	Burner Ignition
Fitment	OEM Direct Replacement

Compatibility

Direct OEM fit for the ICP / Heil / Tempstar RGS091LSBB0AAAA gas furnace and related ICP-family models using the same igniter and connector. The included wiring kit ensures a clean plug-and-play connection to the control board.

Installation Guide

Safety First — Shut off gas and disconnect electrical power; verify zero voltage with a multimeter.
Access — Remove the burner compartment door to reach the igniter at the burner assembly.
Document — Photo the igniter position and harness routing before disconnecting.
Remove — Unplug the igniter connector and unscrew the mounting screw; handle the old igniter by its ceramic base only.
Install — Mount the new igniter without touching the silicon-carbide element, then connect the new wiring kit to the board.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace runs the inducer and clicks but never ignites
No glow visible at the igniter on a heat call
Visible crack, blister, or break in the igniter element
Intermittent no-heat lockouts after several cycles

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS091LSBB0AAAA — OEM Ignitor + Wiring Harness | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091LSBB0AAAA — OEM Ignitor + Wiring Harness | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091LSBB0AAAA — OEM Ignitor + Wiring Harness | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu