ICP Hot Surface Igniter Kit for RGS091LECB0AAA — Includes Wiring Harness | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (part number 1171306) with its matched igniter wiring kit (part number 1188370) is the ignition component for the ICP / Tempstar / Heil RGS091LECB0AAA gas furnace. On a heat call, the furnace control sends line voltage to the igniter; it glows orange-hot in seconds and lights the burner gas. It is the single most-replaced wear item in a modern furnace because the brittle silicon carbide or nitride element degrades with every heating cycle.
The included wiring kit provides the correct connector and harness so the new igniter seats and plugs in cleanly without splicing. A cracked or worn igniter is the classic cause of "no heat" complaints where the inducer runs, the gas valve clicks, but the burners never light and the furnace locks out.
Specifications
| Spec | Value |
|---|---|
| Part Numbers | 1171306 (igniter), 1188370 (wiring kit) |
| Type | Hot Surface Igniter |
| Brand | ICP / Tempstar / Heil |
| Includes | Igniter + wiring/connector kit |
| Application | Gas Furnace Ignition |
| Fitment | OEM Replacement |
Compatibility
Fits the ICP / Tempstar / Heil RGS091LECB0AAA furnace and other ICP-family furnaces that call for OEM igniter 1171306. Verify your existing igniter part number and connector style before installing.
Installation Guide
- Safety First — Turn off the gas and disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
- Access — Remove the furnace burner/blower access panel.
- Document — Photograph the igniter mounting position and harness routing before disconnecting.
- Remove — Unplug the igniter connector and remove the mounting screw, handling the old igniter only by its ceramic base — never touch the element.
- Install — Mount the new igniter (touch only the base), route and plug in the wiring kit, and confirm the element clears the burner.
- Test — Restore gas and power, start a heat call, and watch for a clean glow and burner light-off.
Signs You Need a Replacement
- Furnace runs the inducer but burners never ignite (no heat)
- Visible cracks or breaks in the igniter element
- Igniter glows weakly or not at all on a heat call
- Furnace locks out after several failed ignition attempts
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days