What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091LEBB0AAAA – Furnace | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091LEBB0AAAA – Furnace | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS091LEBB0AAAA – Furnace | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS091LEBB0AAAA – Furnace | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part number 1171306) with its matching wiring kit (part number 1188370) is the component that lights the burners in your ICP / Tempstar / Heil RGS091LEBB0AAAA gas furnace. On a call for heat the control board sends 120V to the igniter, which glows white-hot to ignite the gas as the valve opens. Igniters are the most common furnace failure point — the silicon nitride/carbide element is brittle and degrades with every heating cycle until it cracks or no longer reaches ignition temperature. Typical symptoms include no heat, a furnace that clicks but never lights, or a unit that locks out after several failed ignition attempts. Including the wiring kit ensures a complete, clean connection on installation.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Voltage	120V
Application	Gas Furnace Ignition
Fitment	OEM Direct Replacement

Compatibility

Designed for the ICP / Tempstar / Heil RGS091LEBB0AAAA gas furnace and related RGS-series equipment using igniter 1171306. The included wiring kit 1188370 provides the correct harness and connector for a direct fit.

Installation Guide

Safety First – Shut off gas and power to the furnace, then verify zero voltage with a multimeter.
Access – Remove the burner/service panel to reach the igniter at the burner assembly.
Document – Photograph the igniter position and wiring before disconnecting.
Remove – Unplug the igniter harness and remove the mounting screw(s); handle the element only by its ceramic base — never touch the hot surface.
Install – Mount the new igniter, attach the supplied wiring kit, and confirm the element sits correctly in the burner flame path.
Test – Restore gas and power and watch a full ignition cycle to verify the burners light promptly.

Signs You Need a Replacement

Furnace produces no heat on a call
Igniter never glows or glows weakly
Visible crack or break in the igniter element
Furnace locks out after repeated failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS091LEBB0AAAA – Furnace | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091LEBB0AAAA – Furnace | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091LEBB0AAAA – Furnace | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu