What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091LDAB0AAAA — 120V Silicon Carbide | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091LDAB0AAAA — 120V Silicon Carbide | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS091LDAB0AAAA — 120V Silicon Carbide | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS091LDAB0AAAA — 120V Silicon Carbide | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (HSI) kit is the direct replacement ignition component for the ICP Tempstar Heil RGS091LDAB0AAAA gas furnace. The kit includes OEM igniter 1171306 and igniter wiring kit 1188370. The igniter is a 120V silicon carbide element that glows red-hot to ignite the gas burners on each call for heat. When an igniter cracks, ages, or fails, the furnace will not light — leaving the home without heat. This is one of the most common no-heat failure points on modern gas furnaces and is a routine wear item.

Specifications

Spec	Value
Part Number	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter (HSI)
Brand	ICP (Tempstar / Heil)
Element	Silicon Carbide
Voltage	120V
Application	Gas Furnace Ignition

Compatibility

Engineered for the ICP/Tempstar/Heil RGS091LDAB0AAAA gas furnace and shared platform models across the ICP family (Tempstar, Heil, Comfortmaker, Arcoaire). Always confirm your model and part number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch/breaker and shut off the gas. Verify zero voltage with a multimeter.
Access — Remove the furnace burner/control compartment service panel.
Document — Photograph the igniter mounting and wiring routing before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and carefully withdraw the old igniter without touching the new element with bare fingers.
Install — Mount the new igniter, attach the wiring kit, and reconnect per your photo.
Test — Restore gas and power, then cycle a heat call to confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace blower runs but burners never ignite (no heat).
Igniter does not glow during the ignition sequence.
Visible cracks, chips, or white/blistered spots on the element.
Intermittent ignition or lockout after several failed tries.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS091LDAB0AAAA — 120V Silicon Carbide | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091LDAB0AAAA — 120V Silicon Carbide | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091LDAB0AAAA — 120V Silicon Carbide | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu