What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091HECB0AAA — With Wiring | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091HECB0AAA — With Wiring | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS091HECB0AAA — With Wiring | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS091HECB0AAA — With Wiring | Ships Today
Brand: ICP
SKU: 1171306
Price: 42.84 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit for the ICP / Tempstar / Heil RGS091HECB0AAA furnace includes the igniter (part 1171306) and the matching igniter wiring kit (part 1188370). The hot surface igniter glows red-hot on a heat call to ignite the gas at the burners. Igniters are brittle silicon-carbide or silicon-nitride elements that crack, develop hairline fractures, or burn out over time and with thermal cycling. The included wiring harness ensures a clean, corrosion-free electrical connection so the new igniter heats reliably. When an igniter fails, the furnace will not light and you typically get a lockout fault.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Includes	Igniter + Wiring Harness
Application	Gas Furnace Ignition
Fit	OEM

Compatibility

Direct-fit OEM replacement for the ICP / Tempstar / Heil RGS091HECB0AAA gas furnace. The bundled wiring kit makes this a complete, drop-in ignition repair. Verify your model number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker. Verify zero voltage with a multimeter.
Access — Remove the burner/service panel to reach the igniter at the burner assembly.
Document — Photograph the igniter position and wiring before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and carefully withdraw the old igniter (handle by the ceramic base only).
Install — Mount the new igniter without touching the element, then connect the new wiring kit per your photo.
Test — Restore power and run a heat cycle; confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace will not light and the burners never ignite
Igniter does not glow on a heat call
Visible cracks, chips, or white spots on the element
Repeated ignition lockout faults on the control board

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP RGS091HECB0AAA — With Wiring | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091HECB0AAA — With Wiring | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091HECB0AAA — With Wiring | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu