What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091HDCB0AAA - Includes Wiring Harness | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091HDCB0AAA - Includes Wiring Harness | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS091HDCB0AAA - Includes Wiring Harness | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS091HDCB0AAA - Includes Wiring Harness | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit for the ICP/Heil/Tempstar RGS091HDCB0AAA gas furnace includes the igniter (PN 1171306) and the igniter wiring kit (PN 1188370). The hot surface igniter glows red-hot when energized to light the burners at the start of each heat cycle. Igniters are a primary furnace wear item - the brittle silicon-carbide or nitride element cracks from thermal cycling, contamination, or rough handling, leaving the furnace unable to light. This kit pairs a fresh igniter with a matched wiring harness so worn or melted connectors are replaced at the same time, restoring reliable ignition.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Includes	Igniter + Wiring Harness
Application	Gas Furnace Burner Ignition

Compatibility

Designed for the ICP/Heil/Tempstar RGS091HDCB0AAA gas furnace and related models using the same hot surface igniter and connector. Match the igniter mounting and plug style before ordering.

Installation Guide

Safety First - Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter.
Access - Remove the burner compartment service panel.
Document - Photograph the igniter position and harness routing before removing anything.
Remove - Unplug the harness, unscrew the old igniter bracket, and lift the igniter out - handle the new element only by the ceramic base.
Install - Mount the new igniter, connect the new wiring harness, and route it clear of hot surfaces per your photo.
Test - Restore power, start a heat cycle, and confirm the igniter glows and lights the burners.

Signs You Need a Replacement

Furnace blower runs but burners never light (no heat)
Visible cracks or breaks in the igniter element
Igniter no longer glows during the ignition sequence
Melted, burned, or corroded igniter connector

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS091HDCB0AAA - Includes Wiring Harness | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091HDCB0AAA - Includes Wiring Harness | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091HDCB0AAA - Includes Wiring Harness | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu