ICP Hot Surface Igniter Kit for RGS090STCA0AAA — With Wiring Harness | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter kit for the ICP / Tempstar / Heil RGS090STCA0AAA gas furnace includes the igniter (part 1171306) and the matching igniter wiring kit/harness (part 1188370). The hot surface igniter is the ceramic element that glows red-hot on a call for heat to ignite the gas at the burners. It is one of the most failure-prone parts in a furnace — the brittle element cracks from thermal cycling, vibration, or being touched with bare hands. When the igniter fails the furnace draws the inducer and opens the gas valve but never lights, then locks out on a failed-ignition fault. The included wiring kit ensures a clean, factory-correct electrical connection.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (IGNITOR), 1188370 (WIRING KIT IGNITER) |
| Type | Hot surface igniter with wiring harness |
| Brand | ICP / Tempstar / Heil |
| Voltage | 120V |
| Fits Model | RGS090STCA0AAA |
| Fitment | OEM replacement |
Compatibility
Factory-correct hot surface igniter and wiring kit for the ICP/Tempstar/Heil RGS090STCA0AAA furnace. The 1188370 wiring kit adapts the igniter to the model's harness connector. Match both OEM numbers to your furnace before ordering, and never touch the ceramic element with bare fingers during installation.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
- Access — Remove the burner-compartment service panel.
- Document — Photograph the igniter position, bracket, and wiring connector before removal.
- Remove — Unplug the igniter harness, unscrew the igniter bracket, and carefully lift out the old element.
- Install — Mount the new igniter (handle by the bracket only), connect the 1188370 wiring kit, and confirm correct positioning over the burner.
- Test — Restore power, call for heat, and watch the igniter glow and light the burners through a full cycle.
Signs You Need a Replacement
- Furnace runs the inducer but never lights, then locks out.
- Visibly cracked, chipped, or no-longer-glowing ceramic element.
- Repeated ignition-failure fault codes at the control board.
- Open-circuit reading across the igniter on a continuity test.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days