What igniter fits my ICP furnace?

The correct replacement for ICP model RGS090STBA0AAA — OEM with Wiring | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS090STBA0AAA — OEM with Wiring | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS090STBA0AAA — OEM with Wiring | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS090STBA0AAA — OEM with Wiring | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM Hot Surface Igniter Kit for the ICP Tempstar Heil RGS090STBA0AAA includes the igniter (part 1171306) and the igniter wiring kit (part 1188370). The hot surface igniter glows red-hot on a heat call to ignite the gas at the burners. These igniters are brittle and wear out over time — a cracked or aged element is one of the most common causes of furnace no-heat. The included wiring kit provides the correct connector and leads for a clean, reliable installation. Replacing the igniter and harness together restores dependable first-try ignition.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Fits Model	RGS090STBA0AAA
Fitment	OEM Direct Replacement

Compatibility

Direct-fit OEM replacement for the ICP / Tempstar / Heil RGS090STBA0AAA furnace and equivalent ICP-family models using this hot surface igniter. The included wiring kit ensures the correct plug and lead length. Verify your igniter part number before ordering.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter; allow the furnace to cool.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position and wire routing before removal. Never touch the new element with bare fingers.
Remove — Unplug the igniter harness and remove the mounting screw, then carefully withdraw the brittle old igniter.
Install — Mount the new igniter in the same position, connect the new wiring kit, and route leads away from heat.
Test — Restore power, call for heat, and confirm the igniter glows and the burners light on the first cycle.

Signs You Need a Replacement

Furnace blower runs but burners never light (no heat)
Visible cracks or breaks in the igniter element
Igniter no longer glows on a heat call
Repeated ignition lockouts or fault codes

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS090STBA0AAA — OEM with Wiring | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS090STBA0AAA — OEM with Wiring | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS090STBA0AAA — OEM with Wiring | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu