What igniter fits my ICP furnace?

The correct replacement for ICP model RGS090SFAB0AGAA — OEM Ignitor & Wiring | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS090SFAB0AGAA — OEM Ignitor & Wiring | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS090SFAB0AGAA — OEM Ignitor & Wiring | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS090SFAB0AGAA — OEM Ignitor & Wiring | Ships Today
Brand: ICP
SKU: 1171306
Price: 48.04 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM kit pairs the hot surface igniter (part 1171306) with the matching igniter wiring harness kit (part 1188370) for the ICP Tempstar Heil RGS090SFAB0AGAA gas furnace. On a call for heat, the control board energizes the igniter, which glows red-hot to light the burners. Hot surface igniters are fragile and degrade over time — cracking, carbon buildup, or open elements are the leading cause of furnace no-heat and short-cycling lockouts. Replacing the igniter together with fresh wiring eliminates intermittent connections and restores dependable ignition.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter with Wiring Harness
Brand	ICP / Tempstar / Heil
Fits Model	RGS090SFAB0AGAA
Function	Ignites furnace burners on a heat call

Compatibility

Built for the ICP Tempstar Heil RGS090SFAB0AGAA and compatible ICP-family gas furnaces using this hot surface igniter and connector. Confirm igniter style and plug type against your original before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter.
Access — Remove the burner compartment door.
Document — Photograph the igniter mounting and wiring routing before removal.
Remove — Unplug the harness, unscrew the old igniter, and handle it only by the ceramic base.
Install — Mount the new igniter (never touch the silicon-carbide element with bare hands), connect the new wiring kit, and route per your photo.
Test — Restore power, call for heat, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace ignition lockout or no heat
Igniter does not glow or glows weakly
Visible cracks or breaks in the element
Short-cycling on the heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$48.04

Frequently Asked Questions

Does this Igniter fit my ICP RGS090SFAB0AGAA — OEM Ignitor & Wiring | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS090SFAB0AGAA — OEM Ignitor & Wiring | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS090SFAB0AGAA — OEM Ignitor & Wiring | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu