ICP Hot Surface Igniter Kit for RGS090SEAB0AAA — OEM 1171306 + Wiring Harness | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter assembly (part 1171306) is the ignition source for the ICP / Tempstar / Heil RGS090SEAB0AAA gas furnace. On a call for heat, the furnace control board energizes the igniter; its element glows to roughly 2,500°F and lights the gas at the burners. This listing ships with the matching igniter wiring kit (part 1188370) so you can replace a brittle or melted harness at the same time. A failed igniter is one of the most common no-heat causes: the element develops hairline cracks, oxidizes, or shatters, and the furnace locks out after several failed trial-for-ignition cycles.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (igniter), 1188370 (wiring kit) |
| Type | Hot Surface Igniter |
| Brand | ICP / Tempstar / Heil |
| Application | Gas furnace ignition |
| Fits Model | RGS090SEAB0AAA |
| Fit | OEM direct replacement |
Compatibility
Engineered for the RGS090SEAB0AAA furnace and shared across many ICP-family RGS/RGM gas furnaces sold under the Tempstar, Heil, Comfortmaker, and Arcoaire brands. Always confirm the OEM part number printed on your existing igniter before ordering.
Installation Guide
- Safety First — Shut off gas and disconnect electrical power at the furnace switch; verify zero voltage with a multimeter.
- Access — Remove the burner-compartment service panel.
- Document — Photograph the igniter bracket position and harness routing before disconnecting.
- Remove — Unplug the igniter connector, remove the mounting screw, and lift the ceramic igniter out without touching the element.
- Install — Mount the new igniter (handle by the ceramic base only — skin oils shorten element life), reconnect using the supplied wiring kit, and reseat the harness.
- Test — Restore gas and power, run a heat cycle, and confirm the igniter glows and the burners light cleanly.
Signs You Need a Replacement
- Furnace ignites intermittently or locks out with an ignition-failure fault code.
- Igniter element is cracked, blistered, or no longer glows orange.
- Visible burn marks or melted insulation on the igniter harness.
- Repeated trial-for-ignition cycles before the burners light, or no light at all.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days