What igniter fits my ICP furnace?

The correct replacement for ICP model RGS090SEAA0AKAA — 1171306 + Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS090SEAA0AKAA — 1171306 + Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS090SEAA0AKAA — 1171306 + Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS090SEAA0AKAA — 1171306 + Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 48.04 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit fits the ICP Tempstar Heil RGS090SEAA0AKAA gas furnace and includes the igniter (OEM #1171306) plus the matching igniter wiring kit (OEM #1188370). The hot surface igniter glows red-hot when energized to ignite the burner gas at the start of each heat cycle. The included wiring kit provides the correct OEM connector and pigtail so the igniter mates cleanly to the furnace harness without splicing. Igniters are brittle and consumable — they crack from thermal cycling, contamination, or rough handling — making them one of the most frequently replaced furnace parts during a no-heat call.

Specifications

Spec	Value
OEM Igniter Number	1171306
OEM Wiring Kit Number	1188370
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Application	Gas Furnace Ignition

Compatibility

Direct-fit replacement for the ICP/Tempstar/Heil RGS090SEAA0AKAA package unit. The included wiring kit ensures correct connector fitment to the furnace control harness.

Installation Guide

Safety First — Shut off gas and power; verify zero voltage with a multimeter.
Access — Remove the burner compartment door.
Document — Photograph the igniter mounting and wiring routing before removal.
Remove — Unplug the old igniter connector and remove the mounting screw; handle by the ceramic base only.
Install — Mount the new igniter (never touch the silicon-carbide element with bare fingers) and connect using the supplied wiring kit.
Test — Restore gas and power and confirm the igniter glows and the burners light on a heat call.

Signs You Need a Replacement

No heat — igniter does not glow on a call for heat
Visible cracks or breaks in the igniter element
Furnace locks out after several failed ignition attempts
Delayed ignition or rough burner light-off

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$48.04

Frequently Asked Questions

Does this Igniter fit my ICP RGS090SEAA0AKAA — 1171306 + Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS090SEAA0AKAA — 1171306 + Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS090SEAA0AKAA — 1171306 + Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu