What igniter fits my ICP furnace?

The correct replacement for ICP model RGS090LTAB0AAA — OEM 1171306 + Wiring | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS090LTAB0AAA — OEM 1171306 + Wiring | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS090LTAB0AAA — OEM 1171306 + Wiring | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS090LTAB0AAA — OEM 1171306 + Wiring | Ships Today
Brand: ICP
SKU: 1171306
Price: 51.94 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (ICP part number 1171306), bundled with its matching igniter wiring kit (1188370), is the ignition source for the ICP/Heil/Tempstar RGS090LTAB0AAA gas furnace. On each heat call the control board energizes the igniter, which glows to roughly 2000°F and lights the burners. Hot surface igniters are brittle and degrade with every cycle; the silicon-carbide or nitride element eventually cracks or loses resistance. Typical failure signs are no ignition, the furnace locking out after several trials, or a visibly cracked/whitened element. The included wiring kit ensures clean, correct connections and proper strain relief.

Specifications

Spec	Value
Part Numbers	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Fits Model	RGS090LTAB0AAA
Includes	Igniter + wiring harness kit
Fit	OEM exact replacement

Compatibility

Built for the ICP/Heil/Tempstar/Comfortmaker RGS090LTAB0AAA and platform-mate furnaces specifying igniter 1171306 with wiring kit 1188370. Confirm the part numbers against your furnace's ignition assembly before ordering.

Installation Guide

Safety First — Disconnect power and shut off gas; verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring routing before disconnecting.
Remove — Unplug the igniter harness, unscrew the bracket, and withdraw the old igniter without touching the element.
Install — Mount the new igniter (handle by the ceramic base only), connect using the new wiring kit, and confirm correct gap to the burner.
Test — Restore gas and power, then watch a full ignition cycle to confirm glow and burner light-off.

Signs You Need a Replacement

Furnace blower runs but burners never light
Repeated ignition lockout after several trials
Cracked, chipped, or whitened igniter element
No glow visible during the ignition sequence

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS090LTAB0AAA — OEM 1171306 + Wiring | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS090LTAB0AAA — OEM 1171306 + Wiring | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS090LTAB0AAA — OEM 1171306 + Wiring | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu