What igniter fits my ICP furnace?

The correct replacement for ICP model RGS090LSCB0AAA — OEM Ignitor 1171306 + Wiring 1188370 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS090LSCB0AAA — OEM Ignitor 1171306 + Wiring 1188370 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS090LSCB0AAA — OEM Ignitor 1171306 + Wiring 1188370 | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS090LSCB0AAA — OEM Ignitor 1171306 + Wiring 1188370 | Ships Today
Brand: ICP
SKU: 1171306
Price: 54.60 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (Part #1171306) and matching igniter wiring kit (Part #1188370) restore reliable furnace ignition on the ICP / Tempstar / Heil RGS090LSCB0AAA gas furnace. On a call for heat the control board energizes the igniter, which glows red-hot to light the burners. HSIs are brittle and degrade with every cycle — eventually cracking or failing to reach ignition temperature, leaving you with no heat. The included wiring kit replaces brittle, heat-aged connector leads so the new igniter gets clean voltage.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter (HSI)
Brand	ICP / Tempstar / Heil
Includes	Igniter + igniter wiring harness kit
Fits Model	RGS090LSCB0AAA
Fitment	OEM exact-fit

Compatibility

Direct-fit replacement for the ICP, Tempstar, Heil, Comfortmaker, and Arcoaire RGS090LSCB0AAA and related RGS090 series furnaces using igniter 1171306. Confirm the igniter part number and connector style before ordering.

Installation Guide

Safety First — Shut off gas and disconnect power. Verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter mounting position and wiring routing.
Remove — Unplug the igniter harness, remove the mounting screw, and withdraw the old igniter. Handle only by the ceramic base — never touch the silicon element.
Install — Fit the new igniter and the supplied wiring kit, confirming proper gap and orientation to the burner.
Test — Restore gas and power, run a heat call, and confirm the igniter glows and lights the burners.

Signs You Need a Replacement

No glow during the ignition sequence
Visible cracks or breaks in the igniter element
Furnace locks out on ignition failure
Intermittent no-heat calls or delayed ignition

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$54.60

Frequently Asked Questions

Does this Igniter fit my ICP RGS090LSCB0AAA — OEM Ignitor 1171306 + Wiring 1188370 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS090LSCB0AAA — OEM Ignitor 1171306 + Wiring 1188370 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS090LSCB0AAA — OEM Ignitor 1171306 + Wiring 1188370 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu