What igniter fits my ICP furnace?

The correct replacement for ICP model RGS303HEAA0AAAA — OEM 1179966 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS303HEAA0AAAA — OEM 1179966 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter / Ignitor Electrode for RGS303HEAA0AAAA — OEM 1179966 | Ships Today

Name: ICP Hot Surface Igniter / Ignitor Electrode for RGS303HEAA0AAAA — OEM 1179966 | Ships Today
Brand: ICP
SKU: 1179966
Price: 44.20 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ignitor electrode / hot surface igniter (part 1179966) fits the ICP Tempstar Heil RGS303HEAA0AAAA gas furnace and is responsible for lighting the burners at the start of each heating cycle. When the control board calls for heat, line voltage heats the igniter element until it glows, igniting the gas as the valve opens. Hot surface igniters are brittle and degrade over time — a hairline crack, carbon buildup, or an open element is one of the most common causes of furnace no-heat calls. Symptoms include the furnace clicking and cycling without lighting, repeated lockouts, or no glow visible at the igniter. Installing the correct OEM igniter restores fast, reliable ignition.

Specifications

Spec	Value
Part Number	1179966
Type	Hot Surface Ignitor Electrode
Brand	ICP / Tempstar / Heil
Application	Gas Furnace Burner Ignition
Fit	OEM Replacement

Compatibility

Designed for the ICP Tempstar Heil RGS303HEAA0AAAA and related ICP/Heil/Tempstar/Comfortmaker furnaces using this igniter. Handle the ceramic element by its mounting bracket only — never touch the glow element — and confirm the OEM part number before installing.

Installation Guide

Safety First — Disconnect power and shut off the gas supply; verify zero voltage with a multimeter.
Access — Remove the furnace burner/service panel.
Document — Photograph the igniter position and wiring before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw(s); discard the old igniter carefully.
Install — Mount the new OEM igniter by its bracket only, then reconnect the plug per your photo.
Test — Restore gas and power, start a heating call, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace clicks and cycles but never lights
No visible glow at the igniter during a call for heat
Repeated ignition-failure lockouts
Visible cracks, carbon, or breaks in the ceramic element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter / Ignito...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGS303HEAA0AAAA — OEM 1179966 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS303HEAA0AAAA — OEM 1179966 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS303HEAA0AAAA — OEM 1179966 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu