What igniter fits my ICP furnace?

The correct replacement for ICP model WPG4304040LKB1 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4304040LKB1 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter & Ignition Control Board for WPG4304040LKB1 | Ships Today

Name: ICP Hot Surface Igniter & Ignition Control Board for WPG4304040LKB1 | Ships Today
Brand: ICP
SKU: 1186861
Price: 51.94 USD
Availability: InStock

SKU: 1186861 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ignition assembly for the ICP / Tempstar / Heil WPG4304040LKB1 covers both the hot surface igniter (part 1177663) and the matching ignition control board (part 1186861). The hot surface igniter is a silicon element that glows orange-hot when energized, lighting the burners at the start of every heat cycle. The control board sequences the ignition — energizing the igniter, opening the gas valve, and proving flame before allowing the cycle to continue. Igniters are brittle and degrade with each heat cycle until they crack or fail to reach ignition temperature, while a failed board causes lockouts, no ignition, or short cycling. Replacing the worn igniter and, where needed, the control board restores reliable, safe lighting.

Specifications

Spec	Value
Igniter Part Number	1177663
Control Board Part Number	1186861
Type	Hot Surface Igniter w/ Ignition Control Board
Brand	ICP (Tempstar / Heil)
Igniter Voltage	120V
Fitment	OEM Replacement

Compatibility

Designed as a direct OEM fit for the ICP / Tempstar / Heil WPG4304040LKB1 packaged gas furnace. Both components are the factory-specified parts for this model, so they install without adapters. Verify which part has failed — many no-heat calls are solved by the igniter alone.

Installation Guide

Safety First — Shut off gas and disconnect power; verify zero voltage with a multimeter.
Access — Remove the burner/service panel to reach the igniter and control board.
Document — Photo all wiring and the igniter bracket position before disconnecting.
Remove — Unplug the igniter lead and unscrew the element by its ceramic base only; never touch the silicon. If replacing the board, label every connector first.
Install — Mount the new igniter without touching the hot surface, then reconnect (and reseat the board if replaced) per your photo.
Test — Restore gas and power, call for heat, and confirm the igniter glows and burners light on the first try.

Signs You Need a Replacement

No heat — burners never ignite
Igniter glows weakly or not at all
Cracked or visibly damaged silicon element
Furnace locks out or short cycles on ignition failure

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter & Igniti...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP WPG4304040LKB1 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG4304040LKB1 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG4304040LKB1 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu