What igniter fits my ICP furnace?

The correct replacement for ICP model WUGE080AG01 — 120V Silicon Nitride | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WUGE080AG01 — 120V Silicon Nitride | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WUGE080AG01 — 120V Silicon Nitride | Ships Today

Name: ICP Hot Surface Igniter for WUGE080AG01 — 120V Silicon Nitride | Ships Today
Brand: ICP
SKU: WUGE080AG01
Price: 45.44 USD
Availability: InStock

SKU: WUGE080AG01 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #606996) is the ignition source for the ICP Tempstar Heil WUGE080AG01 gas furnace. When the thermostat calls for heat, the control board energizes the igniter, which glows red-hot (typically 120V) to ignite the burner gas. A cracked, worn, or open igniter is one of the most common causes of furnace no-heat calls. Symptoms include the furnace cycling on the call for heat but never lighting, an igniter that fails to glow, or repeated lockouts after several ignition attempts.

Specifications

Spec	Value
Part Number	606996
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Voltage	120V
Fitment	OEM
Application	Gas Furnace Ignition

Compatibility

Directly fits the ICP Tempstar Heil WUGE080AG01 furnace and shares the same OEM ignition assembly used across many ICP-family gas furnaces (Heil, Tempstar, Comfortmaker, Arcoaire). Always confirm the part number against your existing igniter before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, and shut off the gas supply. Verify zero voltage with a multimeter.
Access — Remove the furnace burner/service panel.
Document — Photograph the igniter mounting and wire routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw(s). The igniter element is fragile — handle only by the ceramic base, never the silicon nitride tip.
Install — Mount the new igniter, confirm proper gap/alignment to the burner, and reconnect the plug per your photo. Never touch the new element with bare fingers.
Test — Restore gas and power, then run a heat cycle to confirm the igniter glows and the burner lights cleanly.

Signs You Need a Replacement

Furnace ignites no flame despite a call for heat
Igniter does not glow or glows weakly
Visible cracks, blistering, or breaks in the element
Repeated ignition lockouts after 3 failed tries

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WUGE...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP WUGE080AG01 — 120V Silicon Nitride | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WUGE080AG01 — 120V Silicon Nitride | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WUGE080AG01 — 120V Silicon Nitride | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu