What igniter fits my ICP furnace?

The correct replacement for ICP model WUGB080AF01 — Silicon Nitride OEM 606996 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WUGB080AF01 — Silicon Nitride OEM 606996 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WUGB080AF01 — Silicon Nitride OEM 606996 | Ships Today

Name: ICP Hot Surface Igniter for WUGB080AF01 — Silicon Nitride OEM 606996 | Ships Today
Brand: ICP
SKU: 606996
Price: 45.44 USD
Availability: InStock

SKU: 606996 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The ICP hot surface igniter (OEM #606996) is the direct-replacement ignition source for the WUGB080AF01 gas furnace. When the thermostat calls for heat, the control board energizes this igniter, which glows to roughly 1,800–2,500°F and lights the gas at the burners. A cracked, carbon-fouled, or electrically open igniter is among the most frequent causes of a furnace that will not produce heat. Common symptoms include the furnace cycling without lighting, an igniter that glows but never lights the burners, repeated lockouts, or no glow at all. Rated for 120V and built to OEM specification, this silicon-nitride-style igniter delivers dependable, long-life ignition.

Specifications

Spec	Value
Part Number	606996
Type	Hot Surface Igniter
Brand	ICP (Heil / Tempstar)
Voltage	120V
Description	IGNITOR X
Fits Model	WUGB080AF01

Compatibility

This igniter is a direct OEM fit for the ICP/Heil/Tempstar WUGB080AF01 gas furnace and shares the same part number across many comparable ICP-family gas furnaces (Comfortmaker, Arcoaire, KeepRite). Confirm OEM part number 606996 against your existing igniter before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, shut off the gas, and verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter mounting bracket and wire harness routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw(s), and carefully withdraw the old igniter without touching the brittle element.
Install — Mount the new igniter in the same position (handle the ceramic base only, never the element), secure the screw, and reconnect the harness per your photo.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace cycles or clicks but burners never ignite
Igniter glows weakly or not at all
Visible cracks, hot spots, or carbon buildup on the element
Repeated ignition lockouts or flashing control-board fault codes

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WUGB...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP WUGB080AF01 — Silicon Nitride OEM 606996 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WUGB080AF01 — Silicon Nitride OEM 606996 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WUGB080AF01 — Silicon Nitride OEM 606996 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu