What igniter fits my ICP furnace?

The correct replacement for ICP model WPG4484090LKA1 — OEM 1177663 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4484090LKA1 — OEM 1177663 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG4484090LKA1 — OEM 1177663 | Ships Today

Name: ICP Hot Surface Igniter for WPG4484090LKA1 — OEM 1177663 | Ships Today
Brand: ICP
SKU: 1186861
Price: 54.60 USD
Availability: InStock

SKU: 1186861 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM hot surface igniter (part number 1177663) with the matching igniter control board (part number 1186861) for the ICP Tempstar Heil WPG4484090LKA1. The hot surface igniter is an electrically heated element that glows to ignite the burner gas at the start of each heat cycle, while the igniter control board sequences and powers the ignition. HSIs are brittle and degrade with every heating cycle; eventually the element cracks or fails to reach ignition temperature. The most common symptom of a failed igniter is the inducer and gas sequence starting normally but the burners never lighting, often followed by a lockout. Handle the igniter element only by its base — skin oils and physical contact shorten its life.

Specifications

Spec	Value
Part Numbers	1177663 (igniter), 1186861 (igniter control board)
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Function	Burner ignition element with control
Fit	OEM direct replacement

Compatibility

Direct-fit OEM replacement for the ICP Tempstar Heil WPG4484090LKA1 and equivalent ICP-built Tempstar, Heil, Comfortmaker, and Arcoaire furnaces using igniter 1177663 and control 1186861. Confirm the part numbers on your existing igniter and board before ordering.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter; shut off the gas supply.
Access — Remove the burner compartment/service panel to reach the igniter and control board.
Document — Photograph the igniter position, gasket, and all wiring before disconnecting.
Remove — Unplug the igniter harness and remove its mounting screw(s); the brittle element breaks easily, so handle with care.
Install — Mount the new igniter without touching the element surface, reseat any gasket, and reconnect wiring per your photos.
Test — Restore power and gas, call for heat, and confirm the igniter glows and the burners light cleanly.

Signs You Need a Replacement

Igniter does not glow on a call for heat.
Visible crack or break in the igniter element.
Inducer and gas sequence run but burners never light.
Furnace locks out on ignition failure after several attempts.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG4...

$54.60

Frequently Asked Questions

Does this Igniter fit my ICP WPG4484090LKA1 — OEM 1177663 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG4484090LKA1 — OEM 1177663 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG4484090LKA1 — OEM 1177663 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu