What igniter fits my ICP furnace?

The correct replacement for ICP model WPG4424090RKB1 — Furnace Ignition | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4424090RKB1 — Furnace Ignition | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG4424090RKB1 — Furnace Ignition | Ships Today

Name: ICP Hot Surface Igniter for WPG4424090RKB1 — Furnace Ignition | Ships Today
Brand: ICP
SKU: 1186861
Price: 45.44 USD
Availability: InStock

SKU: 1186861 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter is the ignition source for the ICP WPG4424090RKB1 packaged gas/electric unit. On a call for heat, the furnace control board energizes the igniter; its element glows white-hot and ignites the gas as it flows across the burners. It is one of the most common furnace failure points because the brittle element degrades with every heating cycle. When it cracks or burns out, the unit will not light — you'll hear the inducer run and the gas valve attempt to open, but no flame and a lockout fault. This listing covers OEM part numbers 1186861 (control board igniter) and 1177663 (ignitor) for the WPG4424090RKB1.

Specifications

Spec	Value
Part Number	1186861, 1177663
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Application	Gas furnace ignition
Voltage	120V
Fit	OEM direct replacement

Compatibility

Direct fit for the ICP / Tempstar / Heil WPG4424090RKB1 packaged gas-electric unit. Also fits many ICP-family packaged and furnace platforms that share the same igniter mount and connector. Confirm your existing igniter against OEM 1186861 or 1177663 before ordering.

Installation Guide

Safety First — Disconnect power at the unit disconnect and shut off the gas supply. Verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter routing and the wiring connector before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw(s). Handle the old igniter by the ceramic base only — never touch the element.
Install — Mount the new igniter so the element sits in the burner flame path, reconnect the plug per your photo. Do not touch the new element with bare fingers; skin oils shorten its life.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows and the burners light cleanly.

Signs You Need a Replacement

No flame on a call for heat despite the inducer and gas valve operating
Visible crack, blister, or break in the igniter element
Igniter glows weakly or not at all
Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG4...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP WPG4424090RKB1 — Furnace Ignition | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG4424090RKB1 — Furnace Ignition | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG4424090RKB1 — Furnace Ignition | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu