What igniter fits my ICP furnace?

The correct replacement for ICP model WPG4424060RKB1 — OEM 1177663 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4424060RKB1 — OEM 1177663 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG4424060RKB1 — OEM 1177663 | Ships Today

Name: ICP Hot Surface Igniter for WPG4424060RKB1 — OEM 1177663 | Ships Today
Brand: ICP
SKU: 1186861
Price: 44.20 USD
Availability: InStock

SKU: 1186861 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM hot surface igniter (part number 1177663), with the matching ignition control board reference (part number 1186861), for the ICP/Tempstar/Heil WPG4424060RKB1 packaged gas/electric unit. The hot surface igniter glows red-hot when the control board energizes it during the ignition sequence, lighting the gas at the burners. Hot surface igniters are brittle and degrade with every heat cycle — the silicon nitride or carbide element eventually cracks or fails to reach ignition temperature. When the igniter fails, the furnace section will not light and the unit typically locks out on a failed-ignition fault, leaving you with no heat.

Specifications

Spec	Value
Part Number	1177663 (igniter), 1186861 (control board igniter ref)
Type	Hot surface igniter
Brand	ICP / Tempstar / Heil
Function	Burner ignition
Fitment	OEM direct replacement

Compatibility

Direct OEM fit for the ICP/Tempstar/Heil/Comfortmaker WPG4424060RKB1 packaged unit. Matches the factory mounting bracket and connector so it seats at the correct position over the burner without adjustment.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter before opening the burner compartment.
Access — Remove the service panel to reach the burner assembly and igniter.
Document — Photograph the igniter position, bracket, and wiring connector before removal.
Remove — Unplug the igniter connector and remove the mounting screw(s); handle the old igniter by the bracket only.
Install — Mount the new igniter without touching the element, then reconnect the plug per your photo.
Test — Restore power, start a heat cycle, and confirm the igniter glows and the burners light reliably.

Signs You Need a Replacement

Furnace locks out on a failed-ignition fault code
Igniter does not glow during the ignition sequence
Visible cracks or breaks in the igniter element
Intermittent no-heat or delayed/rough ignition

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG4...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP WPG4424060RKB1 — OEM 1177663 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG4424060RKB1 — OEM 1177663 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG4424060RKB1 — OEM 1177663 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu