What igniter fits my ICP furnace?

The correct replacement for ICP model WPG4304060RKB1 — Furnace Ignition Assembly | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4304060RKB1 — Furnace Ignition Assembly | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG4304060RKB1 — Furnace Ignition Assembly | Ships Today

Name: ICP Hot Surface Igniter for WPG4304060RKB1 — Furnace Ignition Assembly | Ships Today
Brand: ICP
SKU: 1186861
Price: 55.84 USD
Availability: InStock

SKU: 1186861 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter assembly (part #1177663 ignitor / #1186861 control board igniter) is the component that lights the burners on your ICP/Tempstar/Heil WPG4304060RKB1 packaged gas unit. On a call for heat, the 120V igniter glows red-hot and ignites the gas as it flows across the burners. Igniters are brittle silicon-carbide or silicon-nitride elements that degrade with every heating cycle and eventually crack or fail to reach ignition temperature. A failed igniter is the single most common reason a gas furnace will not light, often showing up as a blower that runs cold or a unit that locks out after several failed ignition attempts.

Specifications

Spec	Value
Part Numbers	1177663 (Ignitor), 1186861 (Control Board Igniter)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil / Comfortmaker
Voltage	120V
Application	Gas Furnace Ignition
Fitment	OEM

Compatibility

Direct-fit OEM ignition component for the ICP/Tempstar/Heil WPG4304060RKB1 packaged gas/electric unit and related ICP-family models originally equipped with these part numbers. Confirm the mounting tab orientation and connector style against your existing igniter before installation.

Installation Guide

Safety First — Shut off gas and disconnect electrical power, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring connector before removal.
Remove — Unplug the igniter harness and remove the mounting screw; handle only by the ceramic base, never the element.
Install — Mount the new igniter, ensuring the element seats in the burner flame path, then reconnect the harness.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and burners light within the ignition trial.

Signs You Need a Replacement

Furnace blower runs but blows cold air
No visible glow at the igniter on a call for heat
Unit clicks and attempts ignition, then locks out
Visible cracks or white spots on the igniter element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG4...

$55.84

Frequently Asked Questions

Does this Igniter fit my ICP WPG4304060RKB1 — Furnace Ignition Assembly | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG4304060RKB1 — Furnace Ignition Assembly | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG4304060RKB1 — Furnace Ignition Assembly | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu