What igniter fits my ICP furnace?

The correct replacement for ICP model WPG4304060LKB1 — OEM Ignition | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4304060LKB1 — OEM Ignition | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG4304060LKB1 — OEM Ignition | Ships Today

Name: ICP Hot Surface Igniter for WPG4304060LKB1 — OEM Ignition | Ships Today
Brand: ICP
SKU: 1186861
Price: 42.84 USD
Availability: InStock

SKU: 1186861 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter lights the burners on the gas-heat section of your ICP/Tempstar/Heil WPG4304060LKB1 package unit. On a call for heat the ignition control sends voltage to the igniter, which glows hot and ignites the gas as the valve opens. A cracked or worn igniter is the most common no-heat failure — the burners never light, the control locks out, and the blower may cycle without producing heat. Kit covers the igniter (1177663) and its ignition control board reference (1186861).

Specifications

Spec	Value
Part Number	1177663, 1186861
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Voltage	120V
Function	Burner ignition

Compatibility

Designed for the ICP/Tempstar/Heil WPG4304060LKB1 packaged gas/electric unit and other ICP-family gas-heat sections using this hot surface ignition system. Match the igniter mounting and the ignition control before installing.

Installation Guide

Safety First — Shut off gas and disconnect power; verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter bracket position and wire routing before removal.
Remove — Unplug the igniter harness and remove the mounting screw; handle the old igniter only by its ceramic base.
Install — Mount the new igniter without touching the silicon-carbide element, then reconnect the harness per your photo.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light cleanly.

Signs You Need a Replacement

No heat — burners never ignite on a call for heat
Visible cracks or breaks in the igniter element
Igniter does not glow when energized
Repeated ignition lockouts at the control board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG4...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP WPG4304060LKB1 — OEM Ignition | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG4304060LKB1 — OEM Ignition | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG4304060LKB1 — OEM Ignition | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu