What igniter fits my ICP furnace?

The correct replacement for ICP model WPG4244060LKB1 — OEM Ignition Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4244060LKB1 — OEM Ignition Control | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG4244060LKB1 — OEM Ignition Control | Ships Today

Name: ICP Hot Surface Igniter for WPG4244060LKB1 — OEM Ignition Control | Ships Today
Brand: ICP
SKU: 1186861
Price: 57.20 USD
Availability: InStock

SKU: 1186861 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface ignition assembly fits the ICP WPG4244060LKB1 packaged gas-electric unit and covers both the ignition control board (part #1186861) and the hot surface ignitor (part #1177663). On a heat call, the control board sequences the inducer and then energizes the hot surface igniter, which glows red-hot to light the gas at the burners. The board monitors flame and safety inputs and shuts down the gas valve if ignition fails. A cracked or worn igniter is the single most common cause of no-heat complaints — the brittle silicon-carbide or nitride element fails open and the furnace locks out.

Specifications

Spec	Value
Part Numbers	1186861 (Control Board Igniter), 1177663 (Ignitor)
Type	Hot Surface Igniter w/ Ignition Control
Brand	ICP
Igniter Voltage	120V
Function	Furnace gas ignition & flame supervision

Compatibility

Factory replacement for the ICP / Tempstar / Heil WPG4244060LKB1 packaged unit's ignition system. Compatible with related ICP-family gas-electric package units using the same hot surface ignition control — verify against your unit's wiring diagram and parts list before installing.

Installation Guide

Safety First — Shut off gas and electrical power, then verify zero voltage with a multimeter.
Access — Remove the burner / control access panel.
Document — Photograph the igniter mounting and all board connector positions before disconnecting.
Remove — Unplug the igniter harness and unscrew the igniter; if replacing the board, release each connector and the mounting screws (never touch the igniter element with bare fingers).
Install — Mount the new igniter and/or board and reconnect every connector exactly per your photo.
Test — Restore gas and power, start a heat call, and confirm the igniter glows and the burners light cleanly.

Signs You Need a Replacement

No heat with the igniter never glowing
Visible cracks, chips, or white-spotting on the igniter element
Furnace ignites then locks out, or repeatedly retries
Control board flash codes indicating ignition or flame failure

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG4...

$57.20

Frequently Asked Questions

Does this Igniter fit my ICP WPG4244060LKB1 — OEM Ignition Control | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG4244060LKB1 — OEM Ignition Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG4244060LKB1 — OEM Ignition Control | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu